components product information connector new mb-0216-1 september 2010 jae pmk div. proprietary. copyright ? 2010, japan aviation electronics industry, ltd. 1/5 features general specifications mx47 series compact waterproof automotive connectors ?no. of contacts: 39 pos. (different keying available) ?contact resistance: 5m ohm max. (initial) 10m ohm max. (after test) ?rated current: 3a ?connector insertion force: 100 n max. ?waterproof: 98 kpa min. (initial) ?vibration resistance: 20g (50 to 1000hz) each pole / 9 hours ?applicable cable: avss 0.3 to 1.25sq ?operating temperature: -40 deg. c to +125 deg. c jae has developed the mx47 series compact, high-density waterproof connector for automotive applications. the mx47 series utilizes a structure similar to the existing mx23a series waterproof connector, but is more compact while maintaining a low height. the applicable cable and performance is equivale nt or higher than the mx23a, there is a guide key for secure mating, and pin terminals have pb-free co mpliant complete plating. superior vibration resistance makes the c onnector ideally suited for use in harsh environments such as the engine areas of both 2 and 4-wheeled vehicles. ?2.5mm horizontal pitch, 3.6mm vertical pitch, 3 row board to wire connector. ?39 position, differ ent keying available. ?guide key for secure mating. ?dowels on both side of connector for light press-fit to board for temporary holding. ?socket terminal is a compact box type wh ich is strong against external force. ?retainer is a simple structure front cap type which is easy to attach. ?pin terminal press-fit structure to prevent leakage of potting material. ?slim type pin terminal with 0. 5mm thickness and 1.0mm width. rohs compliant
mb-0216-1 jae pmk div. proprietary. copyright ? 2010, japan aviation electronics industry, ltd. 2/5 socket connector front cap socket terminal pin connector pin terminal 1 pin terminal 2 pin terminal 3 pin housing component material / finish socket housing 30% gf pbt seal ring silicone r ubber grommet silicone r ubber rear cover 30%gf pbt front cap 30%gf pbt socket terminal brass / tin plating grommet socket housing seal ring front cap rear cover component material / finish pin housing 30% gf pbt pin terminal 1, 2, 3 brass / tin plating socket terminal structure, materials and finishes
mb-0216-1 jae pmk div. proprietary. copyright ? 2010, japan aviation electronics industry, ltd. 3/5 socket housing (available with different keying) front cap (same for different keying product) part number: mx47039xf1 sj drawing: sj109558 part number: MX47039SF1 sj drawing: sj109556 product drawing (pitch) (pitch) company emblem, cavity mark
mb-0216-1 jae pmk div. proprietary. copyright ? 2010, japan aviation electronics industry, ltd. 4/5 pin connector (available with different keying) part number: mx47039nf1 sj drawing: sj109562 socket terminal (two other sizes available according to wire size.) part number: m47s65h2fa sj drawing: sj109559 b105121 m?() applicable dimensions of board (for reference) lot number (pitch) company emblem, cavity mark material
mb-0216-1 jae pmk div. proprietary. copyright ? 2010, japan aviation electronics industry, ltd. 5/5 japan aviation electronics industry, limited product marketing division aobadai building, 3-1-19, aobadai, meguro-ku, tokyo 153-8539 phone: +81-3-3780-2787 fax: +81-3-3780-2946 * the specifications in this brochure are subject to change without notice. please contact jae for information. notice: products shown in this leaflet are made for the applications listed below. however, if the above-mentioned produc ts are to be used in aerospace devices, marine cable-connection devices, atomic power c ontrol systems, medical equipment for life-support sy stems, or any other specific application r equiring extremely high reliability, please contact jae for further information. recommended applications: computers, office machines, measuring devices, telecommunication devices (terminals, mobile devices), av devices, household applications, fa devices, etc. handling instructions specifications et-mx47 part number sj drawing remarks mx47039nf1 sj109562 standard product mx47039nf2 sj109563 different keying product MX47039SF1 sj109556 standard product mx47039sf2 sj109557 different keying product front cap mx47039xf1 sj109558 can be used for both standard and different keying products m47s65h4fa sj109561 m47s65h3fa sj109560 m47s65h2fa sj109559 dummy plug m120-55780 sj036379 same as mx23a connector refer to below for applicable wire and tooling. socket terminal socket connecto r pin connector socket terminal applicable wire hand crimp tool semi-automatic applicator m47s65h4fa 0.3~0.5mm 2 , 1.4~1.6 avss 0.3, 0.5 equivalent ct160-3-mx47 m47s65h3fa 0.75~0.85mm 2 , 1.8 avss0.85 equivalent ct160-3b-mx47 m47s65h2fa 1.25mm 2 , 2.1 avss1.25 equivalent ct160-3c-mx47 3502-mx47-2 terminal removal tool crimp tools product line-up jacs-10621 jahl-10621
|
